How to maintain the vinyl chloride compressor?

How to maintain the vinyl chloride compressor?

When our machine runs for 500 hours, it is in the running-in period. At this time, we only need to change the oil and oil filter.

The vinyl chloride compressor runs for 2500 hours, that is, after the running-in period of the new machine, special oil is used on the basis of the new machine.

When the vinyl chloride compressor runs for 3000 hours, we should replace the air filter element for the machine.

After 4,500 hours of operation of the vinyl chloride compressor, there will be more maintenance work to be done. The oil and oil filter must be replaced. There is also an oil and gas separator. Check whether the pipeline is leaking, check whether the instruments under various pressures and temperatures are normal, etc.

Many users of vinyl chloride compressors have a question: Why do the machines need to be repaired and the maintenance cost is relatively high? Is it cost-effective?

During the operation of the machine, the internal parts are in a fast-running state, and there will be several power conversions. Electrical energy is converted into mechanical energy, and mechanical energy is converted into wind energy. They are carried out in high-pressure places, and internal parts will be worn or damaged.

Someone would like to ask whether the internal parts of the vinyl chloride compressor are damaged and whether they can still work normally. The damage of some parts will not directly affect the normal operation of the machine, but will affect other parts in operation in the future, which will cause the machine to be paralyzed and unable to work normally. In addition, after the machine is used for a certain period of time, some dust will fall into it, and the lubrication function between the parts will be reduced, which will directly wear the machine.

After the vinyl chloride compressor has been used for a certain period of time, a round of maintenance will be carried out. The purpose of maintenance is to remove machine faults, enhance the lubrication effect between parts, remove dust, replace worn or damaged parts, and make the machine run more durable.